Samsung Galaxy Pocket Plus GT-S5310B [Complete Guide] S5310BVJAMJ2 Android 4.1.2 Jelly Bean Firmware

Samsung Galaxy Pocket Plus GT-S5310B [Complete Guide] S5310BVJAMJ2 Android 4.1.2 Jelly Bean Firmware,
S5310BVJAMJ2 Android 4.1.2 Jelly Bean Firmware Last Updated on 22-Feb-2014. Samsung Galaxy Pocket Plus GT-S5310B users can now update their device with the latest VJAMJ2 Android 4.1.2 Jelly Bean official firmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is S5310BVJAMJ2. The Galaxy Pocket Plus S5310B Smartphone was released with Android 4.0 ICS (Ice Cream Sandwich) and receiving Android 4.1.2 Jelly Bean from April 2013. If you own the device and not yet updated any latest firmware, then update this latest firmware using our simple tutorial below. The below guide will help you to download and install the S5310BVJAMJ2 Android 4.1.2 Jelly Bean Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

If your Galaxy Pocket Plus already running on Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy Pocket Plus S5310B to the latest VJAMJ2 Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 VJAMJ2 firmware on your Galaxy Pocket Plus S5310B through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Pocket Plus GT-S5310B model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.1.2 Jelly Bean S5310BVJAMJ2 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Pocket Plus GT-S5310B model.

Brazil (vivo): S5310BVJAMJ2_S5310BZVVAMJ2_ZVV.zip
Brazil (Claro): ZTA-S5310BVJAMJ2-2013120910…zip
Brazil: S5310BVJAMJ2_S5310BZTOAMJ1_ZTO.zip
Brazil (Oi): S5310BVJAMJ2_S5310BZTRAMJ1_ZTR.zip
Chile: S5310BVJAMJ2_S5310BUWAAMJ1_CRC.zip

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 S5310BVJAMJ2 official firmware on Galaxy Pocket Plus S5310B.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Pocket Plus S5310B through Odin:


oden 3.09 update version

 

  1. Download Android 4.1.2 VJAMJ2 Firmware for Galaxy Pocket Plus S5310B from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy Pocket Plus S5310B into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Pocket Plus S5310B to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: S5310BXXDLJ5_S5310BODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer

2 comments:

  1. UnknownApril 11, 2014 at 6:24 PM

    I have samsung galaxy pocket plus but not B ..S5310 only ..where i can get update for my unit ?

    ReplyDelete
    Replies
    1. UnknownAugust 26, 2014 at 6:43 AM

      At Xda Developers you can download custom roms and firmwares... this link: http://www.xda-developers.com/ (just search for your mobile device and download)
      and at Sam Mobile you can download the original firmwares and roms... this link: http://www.xda-developers.com/ (also just search and make sure you has select the rom especified to your device and country.

      att, Derick Maruyama

      Delete

Subscribe to: Post Comments (Atom)