Samsung Galaxy S4 Mini GT-I9195 [Installation Guide] I9195XXUBMK3 Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy S4 Mini GT-I9195 [Installation Guide] I9195XXUBMK3 Android 4.2.2 Jelly Bean Firmware,
I9195XXUBMK3 Android 4.2.2 Jelly Bean Firmware Last Updated on 22-Feb-2014. Samsung Galaxy S4 Mini GT-I9195 (LTE variant) received a new official firmware update which is XXUBMK3 Android 4.2.2 Jelly Bean. Samsung started rolling out an OTA update about the firmware for several countries. The latest firmware build version is I9195XXUBMK3. The Galaxy S4 Mini started receiving firmware update from September 2013 and already get many update by Samsung. If you yet to update your device then you can now update this latest firmware using our simple tutorial below. The below guide will help you to download and install the I9195XXUBMK3 Android 4.2.2 Jelly Bean Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

The Galaxy S4 Mini LTE was released with Android 4.2.2 Jelly Bean and yet to received any further Android version. As the device already running on Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update. So, want to update your Galaxy S4 Mini I9195 to the latest XXUBMK3 Android 4.2.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 XXUBMK3 firmware on your Galaxy S4 Mini I9195 through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy S4 Mini GT-I9195 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.2.2 Jelly Bean I9195XXUBMK3 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy S4 Mini GT-I9195 model.
Germany (E-Plus): I9195XXUBMK3_I9195EPLBMJ1_EPL.zip | Link2

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 I9195XXUBMK3 official firmware on Galaxy S4 Mini I9195.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Mini I9195 through Odin:


oden 3.09 update version

 

  1. Download Android 4.2.2 XXUBMK3 Firmware for Galaxy S4 Mini I9195 from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy S4 Mini I9195 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy S4 Mini I9195 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9195XXDLJ5_I9195ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
That's all the above steps to update Android 4.2.2 Jelly Bean official firmware on Galaxy S4 Mini GT-I9195. Hope you successfully done the update process. If you followed everything as mentioned above, then your your Galaxy S4 Mini should now running on the latest Android 4.2.2 Jelly Bean build version XXUBMK3. You can confirm the firmware update details from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.
No comments:

Samsung Galaxy Pocket Plus GT-S5310B [Complete Guide] S5310BVJAMJ2 Android 4.1.2 Jelly Bean Firmware

Samsung Galaxy Pocket Plus GT-S5310B [Complete Guide] S5310BVJAMJ2 Android 4.1.2 Jelly Bean Firmware,
S5310BVJAMJ2 Android 4.1.2 Jelly Bean Firmware Last Updated on 22-Feb-2014. Samsung Galaxy Pocket Plus GT-S5310B users can now update their device with the latest VJAMJ2 Android 4.1.2 Jelly Bean official firmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is S5310BVJAMJ2. The Galaxy Pocket Plus S5310B Smartphone was released with Android 4.0 ICS (Ice Cream Sandwich) and receiving Android 4.1.2 Jelly Bean from April 2013. If you own the device and not yet updated any latest firmware, then update this latest firmware using our simple tutorial below. The below guide will help you to download and install the S5310BVJAMJ2 Android 4.1.2 Jelly Bean Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

If your Galaxy Pocket Plus already running on Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy Pocket Plus S5310B to the latest VJAMJ2 Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 VJAMJ2 firmware on your Galaxy Pocket Plus S5310B through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Pocket Plus GT-S5310B model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.1.2 Jelly Bean S5310BVJAMJ2 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Pocket Plus GT-S5310B model.

Brazil (vivo): S5310BVJAMJ2_S5310BZVVAMJ2_ZVV.zip
Brazil (Claro): ZTA-S5310BVJAMJ2-2013120910…zip
Brazil: S5310BVJAMJ2_S5310BZTOAMJ1_ZTO.zip
Brazil (Oi): S5310BVJAMJ2_S5310BZTRAMJ1_ZTR.zip
Chile: S5310BVJAMJ2_S5310BUWAAMJ1_CRC.zip

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 S5310BVJAMJ2 official firmware on Galaxy Pocket Plus S5310B.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Pocket Plus S5310B through Odin:


oden 3.09 update version

 

  1. Download Android 4.1.2 VJAMJ2 Firmware for Galaxy Pocket Plus S5310B from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy Pocket Plus S5310B into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Pocket Plus S5310B to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: S5310BXXDLJ5_S5310BODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer

2 comments:

Samsung Galaxy Tab 3 7.0 SM-T211 [Installation Guide] Latest XXAMK3 JB 4.1.2 Official ROM Update

Samsung Galaxy Tab 3 7.0 SM-T211 [Installation Guide] Latest XXAMK3 JB 4.1.2 Official ROM Update,
Samsung Galaxy Tab 3 7.0 SM-T211 (WiFi+3G) received a new official firmware update which is XXAMK3 Android 4.1.2 Jelly Bean official firmware. Samsung recently rolled out an OTA update about the firmware. The latest firmware build version is T211XXAMK3. The device was released in April this year with Android 4.1 Jelly Bean and started received Android 4.1.2 Jelly Bean from the very next month. There is no news about any further android version update for the Galaxy Tab 3 7.0 T211. If you not yet updated your device to the latest available firmware then do it now by following the tutorial below. You can check the latest available firmware for your device through OTA (over the air) from Settings-About Tablet-Software Update.
The Galaxy Tab 3 7.0 T211 was released with Android 4.1.2 Jelly Bean and yet to receive Android 4.2.2 Jelly Bean or later android version. If your device already running on the Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update.

So, want to update your Galaxy Tab 3 7.0 T211 to the latest XXAMK3 Android 4.1.2 Jelly Bean firmware? For official way, either you can go for OTA update or download firmware through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.1.2 XXAMK3 firmware on your Galaxy Tab 3 7.0 T211 through Odin then follow the step by step manual update guide below.

Important Note:

"The firmware is released only for the Samsung Galaxy Tab 3 7.0 SM-T211 model, so don’t try this in any other android device. Check your device model number from Settings-About Tablet. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your Tablet".

Android 4.1.2 Jelly Bean T211XXAMK3 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Tab 3 7.0 SM-T211 model.

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Pre-Requisites:

  • Check battery percentage, your device should have at least 80% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 T211XXAMK3 official firmware on Galaxy Tab 3 7.0 T211.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Tab 3 7.0 T211 through Odin:



oden 3.09 update version
  1. Download Android 4.1.2 XXAMK3 Firmware for Galaxy Tab 3 7.0 T211 from the above list
  2. Download Odin 3.07
  3. Switch off your Tablet and boot Galaxy Tab 3 7.0 T211 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode..
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Tab 3 7.0 T211 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: T211XXDLJ5_T211ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your Tablet should automatically reboot after completion
  13. You can now disconnect your Tablet from computer
  14. Finish
Congrats! you have completed the tutorial and your Galaxy Tab 3 7.0 T211 is ready now with the latest available firmware.  Hope you successfully update XXAMK3 Android 4.1.2 Jelly Bean official firmware on Galaxy Tab 3 7.0 SM-T211. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.1.2 Jelly Bean build version XXAMK3. You can verify the firmware update details from Settings-About Tablet. For any queries feel free to contact with us any time and don’t forget to share your experience in the comment below.
1 comment:

SamsungGalaxy Ace GT-S5830i [Update Guide] S5830ZXXMK1 Android 2.3.6 Gingerbread Firmware

SamsungGalaxy Ace GT-S5830i [Update Guide] S5830ZXXMK1 Android 2.3.6 Gingerbread Firmware,
S5830ZXXMK1 Android 2.3.6 Gingerbread Firmware Last Updated on 22-Feb-2014. Update the latest ZXXMK1 Android 2.3.6 Gingerbread official firmware on Samsung Galaxy Ace GT-S5830i Smartphone. Samsung recently rolled out the firmware. The latest firmware build version is S5830ZXXMK1. The Galaxy Ace S5830i was released back in the year 2011 with Android 2.2 Froyo and receiving Android 2.3.6 Gingerbread from the beginning of the previous year (2012). There is no news about any Jelly Bean update for the device. If you not yet update your device to this latest official firmware, then you can now update the same using our simple tutorial below. You can check  latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

If your Galaxy Ace S5830 already running on the Android 2.3.6 Gingerbread, then you can only expect few bug fixes and performance enhancement with this latest firmware update. It is always recommended to update device to the latest available firmware.

So, want to update your Galaxy Ace S5830i to the latest ZXXMK1 Android 2.3.6 Gingerbread firmware? For official process, either you can go for OTA update by following the above mentioned path or download and update firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 2.3.6 ZXXMK1 firmware on your Galaxy Ace S5830i through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Ace GT-S5830i model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 2.3.6 Gingerbread S5830ZXXMK1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Ace GT-S5830i model.

Russia: S5830ZXXMK1_S5830ZOXEMC2_SER.zip

[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 2.3.6 S5830ZXXMK1 official firmware on Galaxy Ace S5830i.

How to Install Android 2.3.6 Gingerbread Official Firmware on Galaxy Ace S5830i through Odin:

oden 3.09 update version

 

  1. Download Android 2.3.6 ZXXMK1 Firmware for Galaxy Ace S5830i from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy Ace S5830i into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Ace S5830i to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: S5830XXDLJ5_S5830ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congratulations, your Galaxy Ace S5830i is now updated to the latest and official ZXXMK1 Android 2.3.6 Gingerbread firmware. Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Ace should now running on the latest Android 2.3.6 Gingerbread build version ZXXMK1. You can confirm the firmware update from Settings-About Phone. So, explore the latest update on your device and share your experience with us and also let us know how you find the above tutorial using the comment section below.
No comments:

Samsung Galaxy S4 Mini GT-I9195L [How to Install] I9195LUBUBMK3 Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy S4 Mini GT-I9195L [How to Install] I9195LUBUBMK3 Android 4.2.2 Jelly Bean Firmware,
I9195LUBUBMK3 Android 4.2.2 Jelly Bean Firmware Last Updated on 22-Feb-2014. Samsung Galaxy S4 Mini GT-I9195L (LTE, Latin) received a new official firmware update which is UBUBMK3 Android 4.2.2 Jelly Bean official firmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is I9195LUBUBMK3. The device was released with Android 4.2.2 Jelly Bean and yet to receive any further android version. If you yet to update your device with this latest available official firmware then you can now update the same using our simple tutorial below. You can check  latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.
As the Galaxy S4 Mini LTE I9195L already running on Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update. So, want to update your Galaxy S4 Mini I9195L to the latest UBUBMK3 Android 4.2.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 UBUBMK3 firmware on your Galaxy S4 Mini I9195L through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy S4 Mini GT-I9195L model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.2.2 Jelly Bean I9195LUBUBMK3 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy S4 Mini GT-I9195L model.
[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 I9195LUBUBMK3 official firmware on Galaxy S4 Mini I9195L.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Mini I9195L through Odin:

oden 3.09 update version

 

  1. Download Android 4.2.2 UBUBMK3 Firmware for Galaxy S4 Mini I9195L from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy S4 Mini I9195L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy S4 Mini I9195L to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9195LXXDLJ5_I9195LODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
That's all the above steps to update Android 4.2.2 Jelly Bean official firmware on Galaxy S4 Mini GT-I9195L. Hope you successfully done the update process. If you followed everything as mentioned above, then your your Galaxy S4 Mini should now running on the latest Android 4.2.2 Jelly Bean build version UBUBMK3. You can confirm the firmware update details from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.
No comments:

Samsung Galaxy Tab 3 8.0 LTE SM-T315 [Installation Guide] T315XXUAMK1 Android 4.2.2 Jelly Bean Firmware

T315XXUAMK1 Android 4.2.2 Jelly Bean Firmware Last Updated on 22-Feb-2014. Samsung Galaxy Tab 3 8.0 LTE SM-T315 users can now update their device with the latest XXUAMK1 Android 4.2.2 Jelly Bean official firmware. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is T315XXUAMK1. The device was released in the month of June 2013 with Android 4.2.2 Jelly Bean and already received many firmware update. There is no news about any further android version update for the Galaxy Tab 3 8.0 LTE T315. If you not yet updated your device with this latest available firmware then do it now by following the tutorial below. You can check the latest available firmware for your device through OTA (over the air) from Settings-About Tablet-Software Update.

As the Galaxy Tab 3 8.0 LTE T315 was released with Android 4.2.2 Jelly Bean and yet to receive Android 4.3 Jelly Bean or later android version, you can only expect few bug fixes and performance enhancement with this latest firmware update.

So, want to update your Galaxy Tab 3 8.0 LTE T315 to the latest XXUAMK1 Android 4.2.2 Jelly Bean firmware? For official way, either you can go for OTA update or download firmware through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.2.2 XXUAMK1 firmware on your Galaxy Tab 3 8.0 LTE T315 through Odin then follow the step by step manual update guide below.

Important Note:

"The firmware is released only for the Samsung Galaxy Tab 3 8.0 LTE SM-T315 model, so don’t try this in any other android device. Check your device model number from Settings-About Tablet. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your Tablet".

Android 4.2.2 Jelly Bean T315XXUAMK1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Tab 3 8.0 LTE SM-T315 model.

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Pre-Requisites:

  • Check battery percentage, your device should have at least 80% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 T315XXUAMK1 official firmware on Galaxy Tab 3 8.0 LTE T315.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Tab 3 8.0 LTE T315 through Odin:

  1. Download Android 4.2.2 XXUAMK1 Firmware for Galaxy Tab 3 8.0 LTE T315 from the above list 


oden 3.09 update version
 
  1. Download Odin 3.07
  2. Switch off your Tablet and boot Galaxy Tab 3 8.0 LTE T315 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode..
  3. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  4. Now connect your Galaxy Tab 3 8.0 LTE T315 to your computer via USB cable
  5. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  6. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  7. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  8. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: T315XXDLJ5_T315ODDDLI7_INU.tar.md5)
  9. Now, click on the Start button to begin the installation process, wait few moments.
  10. Once completed, you would see “PASS!” message in ID:COM port having green background
  11. Your Tablet should automatically reboot after completion
  12. You can now disconnect your Tablet from computer
  13. Finish
Congrats! Your Galaxy Tab 3 8.0 LTE T315 is ready now with the latest available firmware.  Hope you successfully update XXUAMK1 Android 4.2.2 Jelly Bean official firmware on Galaxy Tab 3 8.0 LTE SM-T315. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.2.2 Jelly Bean build version XXUAMK1. You can verify the firmware update details from Settings-About Tablet. For any queries feel free to contact with us any time and don’t forget to share your experience in the comment below.
1 comment:
Subscribe to: Posts (Atom)