How to flash Clockwork Mod Touch Recovery 6.0.1.2 for Galaxy S3 I9300

If you want to apply Clockwork Mod Touch Recovery 6.0.1.2 on your Samsung Galaxy S3 I9300, in this article I will present a guide about “how to Update Galaxy S3 I9300 with Clockwork Mod Touch Recovery 6.0.1.2.”
For make this update, please notes this tutorial could only have applied on rooted Samsung Galaxy S3 device. When you will install this recovery, you’ll be able to use custom ROMs firmware.
For be able to guide you need quick pre requisites to follow:
Warning

• The instructions in this guide are intended for use with Galaxy S3 GT I9300 smartphone International version.
• Applying these instructions on another device or model may produce undesired outcomes.
• The information in this guide is provided for instructional and educational purposes only. There is no guarantee that these instructions will work under your specific and unique circumstances.
• Use these instructions at your own risk. We shall not hold any responsibility or liability for whatever happens to you or your device arising from your use of the info in this guide.
• Read and understand the whole guide first before actually performing the instructions.

Requirements

• This custom recovery image is only for Galaxy S3 GT I9300 smartphone International version, and we will apply only for this model. If you apply on the network / boot loader locked devices.

We always recommends creating a manual full backup for your precious data present in your Samsung Galaxy S3 I9300 smartphone; you can use the next instruction below mentioned:
For SMS-you can use SMS backup and restore tutorial;
For contacts, you can use Sync with your Gmail tutorial;
For Call Logs, use Download Call Logs Backup & Restore App For Android;
For all Images, Video, Files, Songs- Should Copy to internal/ External SD card;
For save your APN and MMS Settings -“Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names” or you can use this tutorial for save your internet settings.

• Check your battery on your phone and charge it at a minimum is not less than 40%.

• Go to access this path “Settings > Applications > Development > USB debugging”, and there verify if you’ve enable the USB Debugging, if not enable it.

• Turn off all the antivirus protection and firewall tools, these can interrupt the proccess of firmware update.

• Check if your device is rooted or not, for make this, please download the “Root Checker” application from here.

• Verify again if you made all this prerequisites above mentioned and now you can forward the next instructions where we have detailed a guide on:

Guide to Install Custom Recovery Image in Samsung Galaxy S3 I9300:

1. Download the Latest Clockwork Mod Touch Recovery 6.0.1.2 Image.
2. Download Odin from here to your computer.
3. Connect your phone on your computer with your original USB cable.
4. Place this recovery file on your external SD Card, not in internal memory
5. Now disconnect your phone from your computer and turn off the device, to enter in the Download Mode.
6. To enter on Download mode, please holding the Volume Down button+ the Home Key button which it is in the middle.  Note: If your phone starts in “Normal Mode” retry the process to enter in Download Mode.
7. Open Odin app, from your computer, and connect your device on “Download Mode”. Now check if the ID: COM section in Odin becomes Blue that indicating drivers have been successfully installed.
8. Click on “PDA” to select “CF-Root-SGS3-v6.4.tar” file.
9. Press “Start” after the file was selected to start the process of custom recovery installation.

Now you will see a progress bar that will indicate you the status process of custom recovery installation.
The device will restart, and the home screen will be displayed on your device, now you can disconnect your phone to the computer.
Attention Note: If your Samsung Galaxy S III doesn’t turn ON(just in a rare case) or say gets stuck on the Samsung Galaxy Logo, in this case you need to long press the power button to power off the device, or re insert the battery to start the process from the begin.
Congratulation! You successfully flashed on your Samsung Galaxy S3 the latest Clockwork Mod Touch Recovery 6.0.1.2 Image.
via

Force Latest OTA Update on your Android Devices and Download new Firmware

When phone activations are around 1,5 millions Android operating system, I think the users always wait the new updates, in this case if you have a smartphone and want to obtain the last updates and want to know how you can force a smartphone base Android to check for an update, please read below.  Most of the situations the GPS/EDGE connections are slowly and via OTA (Over the Air updates) can’t to download easily  the latest update. Also, when you are into the WIFi or 3G/4G networks connection, the OTA last updates can be downloaded without the problems.

If you want to check for updates in on manually method but to force updates on your Android smartphone,  then you can apply this short guide to get the latest OTA updates in a forceful method.

To Force Latest OTA updates on your smartphone device and to download Firmware you’ve tap:

• Menu button on your phone, select “Settings” > “About Device” > “Software Updates” > after that please find two options “Auto Update and Wi Fi only”, now you can select any option upon your choice.

• In this step once you press on “Update”, you will get a prompt regarding the Software update which is listed below.

• Select the Option of ”OK” after which the firmware update will be searched and listed. If there are any updates available, then this updates will be downloaded over the Wi Fi network, or 3G network.

Whit this short guide you’ll be able to update how you can Force Latest OTA Update on your Android device and to Download the Firmware. Please feel free to share with us another ideas in the comment section, and if you need more help about how you can force latest OTA Update, we will be here and happy to assist you.

source

How to Reset Android phones to Increase Space and Speed

When you restore your device software back at one previous version like when you first purchase the device this means you made a factory reset. Generally we speak of two types of reset options for your device:

• The first method is Soft Reset:

With this method, you  to reset your device to factory default version and to format the SD card, and with this method, you can increase the storage space, and when the reset are done you’ll win the speed for your device. The soft reset method doesn’t require  special assistance from an expert.

• The second method is: Hard Reset

When the soft reset is not  possible, or has other interruption problems, in this case you should make hardware reset with your device. A hard reset for your phone have a special procedure that include some codes or a specific way to format, this method require  some technical skills to do it in an easily way.  In fact, this method is like to reinstalling a new operating system on your personal PC.

If you’ll apply the second hard reset method the data on your SD card still remains and if you want to format the SD card then you need to follow other process to format it.

On this method, the hardware reset, you need to redownload your apps and your settings.

To get a hardware reset for your device, you can follow this procedure:

First turn off your smartphone.

Now press and keep holding HOME button and RED power button for 30seconds until you’ll see a triangle sign with an exclamation mark on the center of a triangle. Keep holding it even the G1 logo is displayed.

Now you have to follow four combination code options:

1. ALT + L– this combination toggle log text display between exclamation and menu options.
2. ALT + S-this combination applies SD card Update.
3. ALT + W – this combination wipe data and factory reset.
4. HOME + BACK-apply for reboot of your smartphone device.

If you hard reset your device phone then you need to re-register your mobile phone. The complete hard reset is done when you have forgotten the Lock Pattern or the Unlock Password.

Download APN Backup & Restore for Android and save APN settings

If you want to save your APN settings, the APN Backup & Restore application is the perfect solution for that, in this article you will find the download link and a short tutorial about how to use the APN Backup & Restore application on your Android device. If you’re running the Gingerbread, Honeycomb and Ice Cream Sandwich then the application is compatible with your devices.
This app allows you to make a full export for APN settings, and after you’ll change the ROM, you will be able to restore-reinsert the correct APN settings.
APN Backup & Restore application for Android 4.0 ICE Cream Sandwich, have a special installation, you should  install app as a system application, after you download the application, and you should  place it on this location on your device SD card:
/sdcard/ApnBackupRestore
In another location if it is stored, the APN settings cannot be restore. First you need to backup, and the APN Backup & Restore will save your APN settings as an XML file. If you want to be sure that you back-up the correct APN stored value then only click ‘backup APNs’, this will save your APN settings, and now tap the menu button and after select ‘send by email’, in this step you should choose your email account and send your APN settings save to your Inbox email.
After the backup is done, when you complete a new custom ROM installation on your device you only need to click ‘Restore APNs’ and select from the options displayed the latest save.  Also, you can alternatively to open your email, and if you already sent the APN save on your Inbox email, then you can very easy to download the specific file and place it on your internal SD card on your Android device.
The next step is to Open App Backup & Restore and loads the save APN settings.
The application is free to download and it is a perfect solution for restore the correct APN settings, and with this solution, after the custom ROM installation you will be able to connect on the internet.
Download App Backup & Restore for Android APK from here.
After install it on your device, confirm the installation and after that, you’ll be free to use it and save your APN carrier settings for your phone device based on Android Operating System.
Note: When you performing data wipe and factory reset actions exist a risk to loss of all important settings on your device, and with this application, you will prevent your device from browsing on the internet

Sync Contacts on Android with Gmail Account

If you love to customize your Android device then you should know it is very easily to sync your contacts stored on your device with the device’s designated Gmail account.
This method will help you to keep your contacts from the phone, or Google plus contacts synchronized with your Gmail account, you can easy perform all new changes and after that to sync with your Gmail account in several steps.
Syncing all your contacts stored in your Android device with Gmail accounts is important if you want to root your device, or to update with  new firmware your phone.
When you’ll root or updating your phone, you’re risking always to lose data stored on your device,  this data can be SMS text messages, MMS, and your contacts. This thing makes us search a solution to prevent this type of data corruption, for helps the Android Users to don’t corrupt them contacts I will present how sync the Android contacts with the Gmail account successfully.
Before guide, you should verify if your contacts are linked with your Gmail account.

• First Open Contacts.

• Now press the Menu>Settings button

• Select the ‘Merge with Google’ after that confirms the action. If you have more than one Gmail accounts you should select the one account which you want to be the default account to host your contacts.

• A pop-up notify message will appear if everything has been successfully merged.

How to sync your contacts with Gmail account guide:

1. First verify if you have a Gmail installed on your Android device.
2. Open the App Drawer>Settings>Accounts and Sync
3. Enable the Accounts and syncing service.
4. Now should  select your Gmail account from the e-mail accounts setup.
5. Verify and make sure that you have enabled ‘Sync Contacts’ Option.
6. Press ‘Sync now’ button and now wait until all your contacts stored on your device have been successfully synchronized with your Gmail account.
7. Open Gmail account on a web browser in an external PC and click the Gmail text link that is listed on the upper left side of your Gmail profile.
8. Now should  select Contacts and then see a page with all the contacts from your Android smartphone have been stored.

That’s all should do it to sync your Android contacts with your account. If you have supplementary extra questions fell free to ask in our comment section.
If you have rooted your device and select factory reset, or you’ve change the custom ROMs, then you’ll need to sync your Gmail account again with your device, and all the phone number and contacts will be restored in your phone; otherwise all your contacts will be remove.

Download AppBak to backup & restore for installed Android applications

If you want to make a backup for all your Android applications, the AppBack is a perfect application that can be used for backup Android applications. You can download from Google play Store and it is a free Android application.

If you ask yourself how to use AppBack to backup and restore all your android application installed on your device, I will try  to give you some useful information about the backup and restore app from your Android device.
This application is perfect when you are usually installing custom ROMs, which that have a special require to data wipe/factory reset option to be applied on your device.
It is very usefully when you have/find a new custom ROM, and you cannot applied in your device because you think you’ll lose all your installed applications, and after you should reinstall all your applications again, the installation of new custom ROM will remove all installed applications on your device.
AppBack app, in fact, it creates a text file where save information about all your installed applications, which you can use it later to reinstall all your Android applications from the market play easily by clicking one application, and you’ll be immediately redirected to Play Store where you can download the latest version for all your installed applications on your Android device.
Download AppBak application from Google Play Store here.

Download AppBak to backup & restore for installed Android applications

If you want to make a backup for all your Android applications, the AppBack is a perfect application that can be used for backup Android applications. You can download from Google play Store and it is a free Android application.
If you ask yourself how to use AppBack to backup and restore all your android application installed on your device, I will try  to give you some useful information about the backup and restore app from your Android device.

This application is perfect when you are usually installing custom ROMs, which that have a special require to data wipe/factory reset option to be applied on your device.
It is very usefully when you have/find a new custom ROM, and you cannot applied in your device because you think you’ll lose all your installed applications, and after you should reinstall all your applications again, the installation of new custom ROM will remove all installed applications on your device.
AppBack app, in fact, it creates a text file where save information about all your installed applications, which you can use it later to reinstall all your Android applications from the market play easily by clicking one application, and you’ll be immediately redirected to Play Store where you can download the latest version for all your installed applications on your Android device.
Download AppBak application from Google Play Store here.

How to Install the ClockworkMod Recovery for the Galaxy Tab P1000

The Samsung Galaxy Tab GT-P1000 is equipped with a 1 GHz Cortex A8 Hummingbird CPU, and 7″ 16M-color TFT LCD capacitive touchscreen of WSVGA (600 x 1024) pixel resolution, is not a place XL, but the Tab makes the S in Galaxy S meaningful. In a big view: is a Galaxy S with 3 inch added to the size of the screen and 2 MG pixels taken out from the camera.

The update for your operating system on your tablet can be made it official or with the custom ROMs.
The upgrading make your device to faster on operating system this thing make us want a custom ROMs, and when we want to take a custom ROMs in our devices, we cannot flashing them without a custom recovery installed in our tablet. ClockworkMod Recovery is a powerful possibility to make this thing. Via Technomancer’s kernel can be installed an easy modality to flash custom recovery on your Samsung Galaxy Tab.
Note: Your tablet should and must be running on stock Android 2.3 Gingerbread before you can go on with the process.

Warning:

• This guide will be applied only if your device is Samsung Galaxy Tab, model number GT-P1000. If you’ll, applying on another model you can produce undesired consequences.
• Use all information from this guide for instructional and educational purpose only.
• There is no guarantee that these instructions will work under your particular and unique circumstances.
• Use all this instruction only at your own risk, Is not our responsibility or liability for whatever happens to you or with your device if you’ll apply this instruction on it.

Read all instructions first and understand the information from this guide before performing this guide.
This guide shows you:

How to flash ClockworkMod Recovery for the Galaxy Tab P1000.

For this guide, we need the next Requirements:

• Samsung Galaxy Tab GT-P1000 device which running on stock Android 2.3 Gingerbread
• A personal PC with Windows Operating System
• Your original USB cable for your tablet
• A software/program that can extract TAR archive files(7-Zip, WinRAR)

On your computer, download the following files:

Technomancer’s Kernel with ClockworkMod Recovery 5 (cwm-5-p1.tar, 5 MB, md5sum: e67e61a27741069e43bf9f790bf35b10)

Heimdall Suite 1.3.2 (heimdall-suite-1.3.2-win32-.zip, 9.6 MB)

Heimdall Suite requires Microsoft C++ Redistributable installed on your computer it to run.

The tablet’s battery must be charged up to 80%, don’t have interruptions during the process.

First of all, backup the tablet data stored on your tablet, to asure yourself with a copy of your personal data, If not you can lose your messages, contacts, Market apps and so on.

For example use Titanium Backup or the Astro File Manager.

For performing a full backup you can follow our previous guides:

Download SMS backup and restore apps for Android.

Download call log backup and restore apps.

Sync contacts with Gmail account.

1.  Extract the archive Heimdall Suite 1.3.2 in the folder named Heimdall Suite.(drivers and the Heimdall Suite application)
2. Now connect your original USB cable to the PC.( don’t connect yet the tablet device)
3. Switch off your tablet.
4. For this step reboot the tablet into Download Mode. For this operation should press and hold in the same time the power button and volume Down button as you connect the other end of the USB cable to your tablet.
5. Go on your Windows PC and double-click the zadig.exe File located on the Heimdall Suite folder; this Application allows you to install the USB drivers in an easy way, drivers needed for Heimdall to establishing a connection with your tablet device.
6. Now going to select Option and now choose from the menu: List All Devices.
7.  Now you will see a drop down list, and in this drop down list select either Samsung USB Composite Device or Gadget Serial, and now choose Install Driver. Heimdall can now use your computer safely.
8. Note: If a prompt appear with the “that the installer is unable to verify the publisher of the driver” message, select “Install this driver anyway.”
9. After the driver installation is done, unplug your tablet device from the USB cable.
10. Power off your tablet device.
11. Reboot the device into Download Mode like as in step 4 described above.
12. Now going to Untar Technomancer’s Kernel. To obtain zImage file. Copy this zImage file into the Heimdall Suite folder. The zImage file should be inside in the same location/folder with heimdall.exe File.
13. For this step you should open a command prompt on your PC. Now you should change directory to where heimdall.exe it is.
14. In command prompt enter the following line command:

heimdall flash –kernel zImage

This command instructs Heimdall to flash your tablet. A blue transfer bar will appear on the tablet showing the kernel being transferred.

The Tablet device will reboot automatically.

Finally, the Samsung Galaxy Tab device now has the ClockworkMod Recovery installed.

Let us know if the custom recovery working well for you, please use the comment section.

via

Download Call Logs Backup & Restore App For Android devices

The ‘Call Logs Backup & Restore’ is a free application for smartphones with Android based operation system that allows the clients to backup call logs directly on the internal device SD card.
Simply you should to create a special folder where call log backup will be stored.
The backup is stored by default in /sdcard/CallLogBackupRestore folder.
This application helps if you need to keep a history of your all the calls (made from or received on your device). The Android system operation have possibility to keep a history of the 500 latest calls and any another call older is automatically deleted when the call overcome this limit.
Call Logs Backup & Restore has support for up 500 calls and with this app you can easily restore all the call log on your phone.
Another great function for this small application it is the possibility when you made an update for your phone, rooted or flashed the firmware of your device and lost all call logs, ‘Call Logs Backup & Restore’ is able to backup and restore your call logs. It is very easy to download it and install it on your smartphone, only go and click here to download Call Logs Backup & Restore from Google play market store.
The application comes with great features:

• The format for Backup Call Logs / History is in XML format.
• You can choose a scheduled time to automatically backup every day if you want to have an auto save job.
• Like as say before, you can choose the name of the file to make the backup.
• You can easily to open with a browser the XML file for viewing easily the content.
• We have the option to adding the date in readable format.
• Another great option it is to use an “Archive Mode” where the backup data keeps getting added to a single file.
• The Backup format is independent of the Android version, so you can easily to move your call logs from an old Android version to a new one, or invers.

Restore Call Logs.

• We have the option to select the backup file to be restored from the folder.
• We can easily view Backup Contents from within the App.
• With this application we can delete all Call Logs on the Phone.
• The application has possibility to Email us a backup file.

Delete existing backup files.

• A specific Option it is to delete old files automatically after specified number of days.

The User Interface has a friendly and easily mode to work with this application, have 6 buttons in the first screen:
Backup: with this button we can to back-up all the Call logs on the phone to the xml file.
Restore: with this button we can read the xml file and creates a new Call log for every entry found in the file. The Duplicates are checked based on number, duration and date/time of the call.
View: with this button we can view the contents of the backup file.
Delete Backups: This button allows us to make a selection of backup files to be deleted.
Delete Calls: This button helps us to deletes all the Call logs on the phone, so that a Restore can be performed.
Donate: with this button if you wish to donate for the App via PayPal access this button.
In Menu Option we find:
Help: – with the help information about the ‘Call Logs Backup & Restore’ App.
Preferences: with this option we can open the Preferences Screen.
Send by Email: this option allows you to send the backup file by a custom email.

How to install Clockworkmod ( CWM ) Recovery on Verizon Samsung Galaxy S3 I535

This guide helps to flash CWM Recovery image for the root users on their Verizon Galaxy S III smartphone (model number I535). In this article if you’ll read all the instructions above presented, you’ll be able to install the ClockworkMod Recovery in one easy and friendly way normally if you’re an advanced Android user.
If your Android phone was rooted then is important to install CWM Recovery,this thing helps root android phone owners to install and custom ROMs, with CMW Recovery you’ll add new functions in the administration on your phone, will improve the performances with new options in a unique look and give you control to do everything you want in your Galaxy S3 without restrictions.
This tutorial is available only if you have a rooted Galaxy S3 on Verizon, be sure to apply all this information showed in this guide to make a good configuration for preparing your computer and your smartphone which you’ll needs for installation process .

Below we have what its need to know before make the CWM Recovery on Verizon S3 phone installation:

• First step is to root your devices using the guide for: Root Verizon Samsung Galaxy S3 I535 .
• Now enable USB debugging option on your Samsung Galaxy S3 device.
• Go to charge the smartphone’s battery, is important because if your phone going to power OFF while flashing the ClockworkMod is very bad for your device.
• Now disable the antivirus protection and antimalware programs which running on your phone.
• Use this CMW Recovery installation only on Verizon Samsung Galaxy S3 devices with the I535 model number.
• This guide should be applied only by advanced Android users. If you don’t have enough experience with the advanced configuration in Android operating systems, you should read this tutorial multiple times, and be sure that you know exactly how to apply this instruction on your devices. Also we recommend reading other tutorials more detailed in the same subject.

Disclaimer: Follow all the instructions carefully mentioned in this article, we should not be held responsible in any manner if you damage your device during the installation of custom recovery image and you should know that you’re applying these changes at your own risk.

Now you can start installing the custom recovery image file. If you cannot install CWM please feel free to ask for our help in comments section. But explain exactly step by step your problem.

Guide to “How to install Clockworkmod Recovery on Verizon Samsung Galaxy S3 I535”

1. First download the CWM recovery image file from HERE
2. Now connect your smartphone to your PC use the original USB cable.
3. Copy the recovery.img file on your Galaxy S III Verizon on internal SDcard, be carefully, don’t make another new folder, just drag and drop the file on the internal SDcard on main folder.
4. Now disconnect your phone device from your PC.
5. Go to download and then install Terminal Emulator application on your smartphone from Google Play Store download .
6. Now launch application the Terminal Emulator.
7. In the Terminal Emulator app enter the next command: su
8. Tap ‘Allow/ Grant’ button to allow root access for TE.
9. Enter following command to install the CWM Recovery file: dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 (this command will install the Clockworkmod Recovery on your device).
10.  Now test to see if was successfully installed. Type this command in Terminal Emulator app: reboot recovery
11. Your device will restart into CWM Recovery menu and now you can use it to flash new custom ROMs and other file and applications.

Note: If you want to restart your Galaxy S3 Verizon phone into normal Android mode, please select the ‘reboot system now’ option from the CWM Recovery main menu and now wait for doing this process.

Now your phone has CWM Recovery installed. If you have problems and you didn’t manage to flash the files, feel free to ask us in comments section and let us to know step by step all the details and we will try to help you to complete the installation.

Remember you’ve installed this all files at your own risk and you shouldn’t blame us in case your smartphone got damage or you lost any files during the installation

How to Root Verizon Samsung Galaxy S3 I535

To root your Verizon Galaxy S3 smartphone device, you will need to respect all instructions bellow , and when the process is complete you’ll be also able to flash CWM Recovery image on your device.
This tutorial will help you to learn how to successfully root Verizon Galaxy S3 device using the Odin application and two files in .img format.
When you will have root rights on your device you’ll be able to install and run new Android applications with root needs, another greats advantage its performance device improvements, in plus, eventually flash new custom ROMs on your Android smartphone.
Read the preparation guide with attention before starting to root your device.
How to correctly prepare the Verizon Galaxy S3 smartphone and your computer for the root process:

• This guide is only for the Verizon Samsung Galaxy S3 model number I535.
• Do not apply this tutorial on other US variants of S3 nor on any other International Galaxy S3 device.
• Check your device’s number model:

for make this: Open> Settings and see on about phone menu the model number for your device.

• Make backup for all files stored on your phone.
• Enable USB Debugging from Android option.
• Charge your device Verizon S3 battery until it reaches 80% power levels, this thing will assure you to prevent a power OFF when you’re applying the rooting process.
• Install on your Computer the USB drivers for Samsung Galaxy S3 USB.
• Disable all antivirus or antimalware programs protection from your computer.

This guide requires being an advanced Android user and you should to be an advanced Android user.
Apply only the steps presented in this tutorial and you should be safe.
NOTE: Use this guide at your own risk. We will not be held liable for any damage on your device as a result of using  all instructions and this guide.
Now if you understood all risks and all instructions above, it means that you’re ready to apply the next guide:
Don’t skip any steps, read all guide steps and instructions first and only after start installing Odin and root your device.

Guide How to root Verizon Galaxy S3 with Odin tool

1. First download application Odin 3.07  from HERE.
2. Extract the zip file into Odin folder.
3. Download the next two root files on your PC: Blank System.img.tar | Rooted System.img.tar
4. Save them in the Odin folder.
5. Power OFF your Verizon S3 device, and boot into Download Mode.
6. To Enter on Download Mode must to press and keep hold ‘volume down’ + ‘home’ + ‘power’ buttons at the same time.
7. A ‘warning!!’ alert will by display on your device and now you need to press ‘volume up’ to load the Download Mode.
8. Run ODIN executable.
9. Now should to connect the Galaxy S3 I535 to your computer via Original USB Cable.
10. Check ODIN application, if ODIN says ‘added!!’ can to apply the next step, if not says ‘added!!’ you should return on preparation requires guide and download and install the USB drivers for your device. Another solution is to change the USB port from your computer and see if ODIN says that the device was ‘added’.
11. When all drivers have been installed ok and the ODIN application work with your smartphone, you can move to the next step.
12. Click the ‘PDA’ tab in ODIN and select ‘black.system.img.tar’ file.
Attention: don’t change the default ODIN options and be sure that the ‘re-partition’ setting is not checked.
Press START and now the Blank system.img.tar file will begin to install on your Verizon S3 smartphone.
13. When the installation is finished your Verizon S3 will restart automatically, and when the Samsung LOGO is displayed you can unplug the smartphone from your computer.
ODIN should say ‘PASS’. If ODIN don’t work and gets stuck :

• Unplug the Smartphone
• Remove battery device.
• Close ODIN application.
• Re-insert the battery on your device.
•  Repeat the guide starting with step 6.

Note: When you installing the Blank system.img on your device Verizon Galaxy S3, the device will restart and it will remains locked in the moment when the Samsung logo appears, be calm and go on to remove the smartphone’s battery, after that re-insert the battery and boot into Download Mode your device once again.
For Next steps follow the instructions bellow:

• Boot your device in Download Mode (like you did at step 4).
• Close the Odin application and after that launch the Odin application again.
• Connect your smartphone to your PC via original USB cable.
• Click in ODIN application the ‘PDA’ tab button and after that select ‘rooted.system.img.tar’ file.
• Press ‘START’ button in ODIN and now should to wait until the rooted system image file is flashed.

After the process will be completed, your device will reboot and now you can unplug the USB cable from your smartphone when the Samsung Galaxy S3 Logo is displayed.
Your Verizon Samsung Galaxy S3 model number I535 device should boot now into normal Android mode, and root was successful.
Now your smartphone is rooted and you can start to install new application with the root require, on the next address you will find also one tutorial about how to install CWM Recovery on Verizon Galaxy S3 phone.
If you have questions please feel free to ask us in our comments section, and of course if you know other methods to easily root the Verizon variant of Galaxy S3, please share with us.

Install I9300XXUGML3 Official Firmware on Galaxy S3 to Android 4.3 [Guide]

A new firmware is now available for global variant of Galaxy S3 devices; it is about of the new Android 4.3 I9300XXUGML3 Official Firmware.

The new firmware has been released as an OTA (Over-The-Air) update and trough Samsung KIES application (servers) in several regions and countries including Indonesia, Philippines, Malaysia, Vietnam, Singapore and Thailand.

The new update is based on Android 4.3 platform, and its build date is on Dec 26, 2013. Its specifications include PDA: I9300XXUGML3, MODEM: I9300DXUGMK1 and MODEM: I9300DXUGMK1. In Additional, the new update can be flashed on any unlocked Galaxy S3 GT-I9300 devices by using a manually step by step guide. That’s why we will provide you a step by step guide where you’ll teach how easily install the new Android 4.3 I9300XXUGML3 official firmware on Galaxy S3 device.

Pre-requisites and guidelines to follow before to install the new firmware:

• Android Source Team provide this guide for educational and instructional purpose, so we will not be held liable or responsible for any data lost or damage to the device during or after the ROM installation. Apply this guide only on your own risk.
• Download and install suitable USB Drivers for Samsung Galaxy S3 device on the PC. Download link for USB Drivers here.
• Enable the USB Debugging Mode on the smartphone from Settings>Developer Options.
• A full backup is required to avoid potential data delete or corruption, so backup all your important data stored into Galaxy S3 device’s internal memory.
• The Galaxy S3 device should be factory unlocked, not locked in any specific carrier.
• Ensure that the device’s battery has more than 85 % power left.
• The new official Android 4.3 (I9300XXUGML3) firmware is fully compatible with all Galaxy S3 GT-I9300 devices only. Do not use this firmware in any other incorrect versions of Android devices as it may damage or brick your device.
• To be sure about the device model verify this by navigating to Settings>>About Phone.

How to update Samsung Galaxy S3 with Android 4.3 I9300XXUGML3 Jelly Bean Firmware:

1. Download Android 4.3 XXUGML3 JB Firmware for Samsung Galaxy S3 I9300 device.
2. Download ODIN application from here.
3. Now, extract the downloaded Android 4.3 JB firmware to obtain a .tar.md5 file and some other additional files.
4. Now, extract the ODIN archive to get ODIN3 v3.07.exe and some other files.
5. Turn off the Samsung Galaxy S3 device.
6. Boot it into Download Mode. (Press and keep holding the Volume Down, Home and Power buttons in the same time until an Android icon with together with a warning triangle will be displayed on the screen and then press once again the Volume UP button).
7. Open the ODIN application on PC as an Administrator.
8. Now, by using the USB cable with the device in Download Mode connect the Samsung Galaxy S3 device.
9. When the ODIN application detects the S3 device a “Added” message will appear on the display and the ID:COM box with the COM port number will turn light blue. If the “Added” message fails to be displayed try to reinstall once again the USB drivers.
10. Now, load the extracted files in ODIN application from the extracted I9300XXUGML3 firmware folder:
11. • ·         From ODIN tap on PDA button and from there select the .tar.md5 file.
    • ·         From ODIN, tap PDA button and select the .tar.md5 file.
    • ·         From ODIN select the CSC button and chose the file named CSC.
    • ·         From ODIN click PIT button and select the file with the .pit extension.
    ·         Note: if the MODEM, CSC and .pit files are not found you should ignore these steps.
12. In ODIN application select Auto Reboot and F. Reset Time options. The Re-Partition option must rest checked only if you have a .pit file in the previous steps.
13. Now, verify once again all the steps to be done correctly.
14. Press on START button in ODIN to start the flashing process.
15. Once the new official firmware is completely installed a “PASS” message with a green color on the background will be displayed in the left top of ODIN application.
16. After that the Samsung Galaxy S3 device will get an automatically reboot to the Home screen.
17. Disconnect the USB cable from the PC.
18. These were all the steps in order to install the new official Android 4.3 I9300XXUGML3 JB firmware.
19. Verify the OS version from Settings>About Phone.

Troubleshooting:

If the Samsung Galaxy S3 I9300 device is stuck on the first boot animation you need to:

Boot the device into Recovery Mode by pressing and keep holding the Volume UP and Power buttons in the same times.

From the Recovery Mode perform Wipe data/Factory Reset and Wipe Cache Partition operations.

Return to the main menu of the Recovery Mode and choose Reboot System Now option.

Note: Into Recovery Mode menu you need to use the Volume Keys to navigate between its options and the Power key to select the options that you want to use.

Important: the data wipe task will erase your entire device’s internal memory but not external SD card data.  So by knowing that, you need to ensure that you get a full backup for all your critical data.

Flash the Official SlimKat 4.4.2 Nightly Builds for Samsung Galaxy S4 I9505 [Guide]

All Galaxy S4 I9505 devices’ users who want to install the latest Official SlimKat custom ROM are now happy to know that the new SlimKat KitKat AOSP 4.4.2 ROM is available for download and install.

The SlimKat custom ROM is a stable one, and it is based on Android 4.4.2 KitKat firmware. If you want to learn more about this ROM you can take a look at SlimROM official web page here.

Prerequistes:

• During this step by step guide,  we will show you how easily to install the Official SlimKat 4.4.2 Nightly Builds on Samsung Galaxy S4 I9505 device. Note that this guide is for advanced Android users only.
• This guide is compatible only with Samsung Galaxy S4 LTE model number I9505 device with the Snapdragon 600 the International variant. So by knowing that this step by step guide will not be compatible with the US Galaxy S4 LTE versions of Samsung Galaxy S4 device nor with the I9505 (Exynos) model of the S4 smartphone.
• The Samsung Galaxy S4 I9505 device has to be a rooted one and to have the latest CWM Recovery Image version installed on it. We don’t test this guide with the TWRP Recovery image.
• Backup all your data stored into S4 device and create a full NANDROID Backup for the existent installed ROM, this backup will represent a restore point in case you don’t like the new custom ROM or something work wrong.
• The step by step guide will contain a Factory Reset step that will help the user to apply a clean installation for the new custom ROM.
• Important: The Factory Reset action will wipe all data from the system partition, but the internal/external storage cards will not be affected by this Factory Reset step.
• Backup all your application installed on the S4 device, SMS text messages by using the Helium application, a step by step guide about how to do this is available here.
• Save your contacts from your device, to do this you need to sync contacts info with your Gmail account. Guide here.
• Ensure that the device’s battery charge level is more that 60 %, this will prevent your device to take a forced power off in the middle of the flashing process.
• This guide is provided only for educational and instructional provide, so do not blame us in case something wrong is happen by applying this guide on your device, we cannot be held liable or responsible for any data lost or damage of your device during or after the flashing process.
• Do not skip any steps from this guide.
• From Developer Option menu, enable the USB Debugging mode. Developer Option, in some cases might be hidden, so you should open the Settings menu, then More and go to About Phone and press Build Number seven times.
• If you cannot complete this step by step guide, then you can use our comments section for more help.

How to install SlimKat the Official Nightly custom ROM for Galaxy S4 LTE:

1. Firstly, download the SlimKat custom ROM zip from here, download the latest build available.
2. Secondly, download Gapps for SlimKat ROM from here.
3. Now, connect the Samsung Galaxy S4 LTE I9505 device to your computer.
4. Move (Copy/Paste) the both downloaded zip files to the device’s internal storage. Ensure that you don’t unzip the contents.
5. Once the both files are copied successfully, disconnect the smartphone from the computer.
6. Turn off the smartphone now.
7. Boot the device in CWM or TWRP Recovery Mode. Guide here.
8. Create the Nandroid ROM backup for your existent ROM. To do this you should select ‘backup and restore’, then give a name to the file and confirm the process.
9. Apply the Factory Reset, by selecting ‘wipe data/ factory reset’ and confirm. Then you need to use the ‘format /system’ option too.
10. Next, select ‘install zip from sdcard’, then ‘choose zip from sdcard’ find the ROM file and confirm the installation to install the SlimKat 4.4.2 Weekly custom ROM.
11. Once the new custom ROM is flashed you need to repeat step 10 actions to flash the Gapps zip file.
12. After the both files are successfully installed, then you can return to the main Recovery menu.
13. From the main Recovery menu reboot the smartphone now into normal mode.
14. The first boot process will takes around five minutes to be done. So, do not press any buttons until the first home screen to appear.
15. Now, put your Google account info when you’re asked and take control over the phone.

Congratulation, the flashing process is done, now you’ve successfully learned how to install the latest official SlimKat custom ROM on the Galaxy S4 LTE International device.

If the first boot process takes more than 10 minutes, and the main home screen doesn’t appear or the smartphones enters into a boot loop, then you need to repeat the above step by step guide once again.

Install WhatsApp app on your Tablet [Guide]

One of the most popular applications on Android world, WhatsApp has been designed for smartphones only, and if you have a tablet based on Android OS is a bit difficult to install the application on it.

During this present guide,  we will show you how to install WhatsApp application on your tablet based on Android OS.
We have two methods to install WhatsApp application on your tablet, one of the methods requires from user to verify WhatsApp with the user’s phone number, this method will allows you to use the application on your tablet device, but you won’t be able to use the WhatsApp with the phone number used on another device. But here, during the tutorial you can install an app that will allow you to send and receive SMS messages on another phone number so that will allow you to activate WhatsApp application on your Tablet based on Android OS.
As I said before the WhatsApp application doesn’t work on two devices which have the same phone number.

How to install WhatsApp application on a tablet based on Android OS by using your own phone number.

• This method isn’t so difficult, but the disadvantage is that you cannot use the WhatsApp application with your phone number on another device. If this thing does not bother you then you can use it; otherwise you can use the second step by step guide from below.
• First, download the WhatsApp apk application from here or from here. (It’s is the official APK file, so you don’t worry about malware, it is safe).
• Once the download process is done you need go to the Settings > Security and check Unknown Sources on your Android tablet. In the other case,  the tablet won’t allow you to install the application.
•  After you check the settings options go to the Downloads and from there install the WhatsApp application.
• After the Whatsapp application is successfully installed, you need go back to the Settings>Security and from there uncheck Unknown Sources to prevent the applications download from outside to the Google Play Store to be installed on your tablet.
• Now, open the WhatsApp application and when the application asks your phone number to verify it you should enter a phone number from your phone. After you’ll receive an SMS with one confirmation code, go and enter this code into the application. Now, you can use the WhatsApp application directly from your tablet based on Android OS.
• Note: If the phone number used for verifying the activation code for WhatsApp application is used on another device, the application will stop to work on your tablet.

How to install the WhatsApp application on your tablet with textPlus

• If there isn’t a spare phone number to be used to activate the WhatsApp application on your tablet, then you can use an application to do this, the application is named textPlus.
• The downside is your friends won’t have you in their contact list, being an unknown phone number, so you will have to let them know this is you.
• Firstly, download the WhatsApp APK application from here.
• Enable the Unknown Sources from Settings > Security on the Android Tablet where you want to install the application.
• Now go to the Downloads and from there install the WhatsApp application.
• Once the WhatsApp application is installed go back to Settings menu and disable the Unknown sources.
• Now, from Google Play Store you should to download and install the textPlus application (download link). The textPlus application allows users to send and receive SMS for free.
• Once the textPlus application is successfully installed you need to send an SMS to your own phone number to find out the allocated number of textPlus application for you.
•  After that,  you should launch the WhatsApp application and enter the allocated phone number that the textPlus application gave you.
• Now, wait for the verification code to be sent on the textPlus application and enter it into WhatsApp application.
• Now, the WhatsApp application can be used with your tablet and the new phone number.

Please, let us know if you’ve successfully installed the WhatsApp application on your tablet by using our comments section from below.

Backup Applications Data and SMS by using Helium app for Android (No Root Rights are required)

Koushik Dutta a ClockworkMod’s developer released a great application named Helium tool. The Helium application has been released for Android devices, and it works with all version of this OS without requiring root rights.

The Helium application has two versions free and premium. The both versions, free and paid have been downloaded by millions of Android OS’s users, and the number continues day by day to grow.

The Helium application for Android is one of the best backup tools ever developed and released for Android smartphones and tablets.

With the Helium application, you can backup your SMS text application, installed applications and files that are currently stored in the application’s installation folder.

The great advantage is that; you can store all this data directly on your smartphone or tablet device’s internal or external storage. Additionally, you can use a cloud service that allows you to save your data in the cloud. You can use services such as Drive, Dropbox or Box.

Unfortunately, the cloud service function is available only for Premium version of Helium application.

You can download Helium application for Android Free version directly from Google Play Store by using this link or you can download the Helium for Android Premium version from Google Play Store via this link.

In the next section, we will show you how easily setup Helium tool application for Android devices:

• First step is to download and install the application on your device. If the device is rooted, then you can skip all the steps and after you have downloaded and installed the application you can start testing it.
• If your device has a non-rooted Android OS then you should continue to follow the next steps.
• Firstly, download the Helium Desktop application on your personal computer. Download link can be found here.
• After the download process is complete, you need to install the application.
• Connect your Android device via PC by using the USB Data cable.
• Now, all you need to do is to follow the Helium application indications.
• Set up the application such as your default data backup method and after that start saving all your important app data.

Keep in mind that: the Helium app free version allows the users to backup and restore to SD card and backup and restore from computer. The premium version of Helium comes without ads and in additional you’ll be able to set Automatic Backup schedules, Cloud Storage backup feature and Android to Android sync option.

Remember that the Helium tool application is fully compatible with all devices running Android 4.0 or later.

Note the application isn’t compatible with Motorola devices and some Sony devices.

Download Google Translate for Android

Google translate for android is a very useful application when you use smartphone based on Android operating system.
It is an application that helps us to quickly translate words or phrases in more than 64 languages.
With his speed, but also the stability that has, Google Translate for Android is an application that is among the best applications of translation in the world.
It has an easy to use interface where you can use text, voice, and the recognition of images. (For text, we can type text or import it.)

With Google Translate you can to translate text between 64 language, you can use the camera to take pictures and brush the text to translate, this functions are available on Android 2.3 and above.
Now you can communicate with your friends using speech-to-speech translation in your conversation Mode (ALPHA, 14 languages).
When you use Google Translate start by choosing the language you want to translate into another language from a drop down list with all available languages.
At the bottom of the screen are three buttons that represent the three ways to input message (text, voice or image).
After the message, press enter and you will see that the translation application will quickly translate the message entered.
The application Google Translate for Android is in the category ‘Must Have’ in applications suite available for Android. Google Translate for Android works very well, I did not notice the functional bugs or errors, it happens sometimes not recognize certain words. It is a free application for Android.

Download Google Translate for Android

How to Root Asus Transformer TF300T on Android 4.1 Jelly Bean

Any Those who did update their ASUS Transformer Jellybean TFT300T with the latest firmware 10.4.2.13, now can they root their tablet. Once rooted your tablet, you can install custom ROMs that support the applications that when the tablet isn’t rooted you cannot install. In another way besides the user experience will be improved, with the root access you can access any file on the operating system, but it is also dangerous if you do not have enough experience, and you do not sure what you’re doing there.
So, if you want to root your device, make sure your device is unlocked boot loader, will not work if the boot loader is locked.
In addition you should check the firmware version that is installed.
To do this you need to follow this path: “Settings> About Tablet”
There the latest version of firmware must be version 10.4.2.13. If there is different version, this guide cannot be applied.
For your convenience, I will present some necessary pre instructions that you must follow. Full credits to the DA Senior Member surdupetru who has come up with this workaround:

Disclaimer: Follow all the instructions carefully mentioned in this article, we should not be held responsible in any manner if your ASUS Transformer Pad TF300T doesn’t boot up or gets bricked due to not following the instructions.

Only if your device is not unlooked boot loader, then you can unlock it by ASUS official website.
Pre requisites:
Make backup of all data present in your device, so make sure that if you lose any data or corrupt any data, the same data can be restored.
For this we provide our recommendations listed below:
SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

• The battery must be fully charged for your device at least 60% in order to make sure that the device cannot be stopped in the middle of updating the firmware.
• Make sure USB Debugging Mode is enabled on your device.
• Disable all antivirus filters on your device and your computer.
• Make sure your device has USB port enabled auto complete read / write access.
• Install all drivers for Asus Transformer TF300T device in your computer.

Make sure you have done well all above instructions and after you have checked, you can proceed to the next step which is summarized in a detailed guide on how to root your device Asus Transformer TF300T .

Guide “How to Root Asus Transformer TF300T on Jellybean 4.1 firmware 10.4.2.13 version”:

1. Download the asus.7z zip file to your computer.
2. Extract file in the same name folder to get asus.zip.
3. Connect your device to the computer using the original USB cable
4. Place the zip file in the device.
5.  After the file it’s placed, disconnect the device and turn off the same so that it can be entered in the recovery mode.
6.  Press and Hold Volume Down button + Power button in the same time to enter the device in the recovery mode till you see the message “Press Volume Up to enter RCK (5s)”.
7. After that, now press Volume Down once to highlight the USB icon
8. Then press the Volume Up button to confirm the same.
9. In recovery mode you will have to select the option of “Cache/Dalvik cache” to wipe the cache as it will clear out the cache from the recovery mode.
10. In the recovery mode, you need to select “install zip from SD card” > “choose zip from SD card” and then choose the asus.zip file which you placed in your device.
11. After the file is selected, wait around 3 – 4 minutes for applying the zip package.
12. After the rooting package is applied successfully, wait now than expected for booting up the device. (it may take longer time). Ensure that you are not pressing the power button in the process of device being booted up.

Now you successfully rooted the device.
Download the “Root Checker” app from the Google PLAY Store and check if the device has been rooted or not.
Note: If your ASUS Transformer Pad TF300T device refuses to turn ON or say if it gets stuck on the ASUS Logo then you need to long press the power button to turn off the same or re insert the battery to start the process from beginning.
Via

Samsung will ship the Galaxy Note II to Europe in the next 2 weeks

Many people looking forward to take in hand the new Samsung Galaxy Note II, the good news from Samsung is will ship in two weeks in Europe, with an advice price of 699 Euro.
Some countries will have the Samsung Galaxy Note II earlier two weeks or later, but it is expected in the most countries in Europe to have Galaxy Note II on the weeks 40 and 41.
Samsung Galaxy Note II was first presented at IFA Berlin 2012 with the next Technical Details:
We have a great device with 5.5” display with a quad-core processor and a back camera with 8 megapixel . Samsung Galaxy Note II will run latest version of Android Jelly Bean,the version 4.1.1.
The first generation of Galaxy Note will receive this update on the end of this year .
Samsung aims to sell over 20 million devices Galaxy Notes II,based on they success with Galaxy Note, they have already sold 10 million devices the Galaxy Note.
Samsung Galaxy Note II will be available in two colors: Marble white and Titan gray.

Release dates Samsung Galaxy Note II in some countries in Europe:

• France October 1-2
• Germany September 27
• Italy September 28
• Netherlands October 1-2
• United Kingdom October 1-2

SamMobile will create a review for Galaxy Note II and will be online in October, so now we present you a hands-on video from IFA 2012 in Berlin SamMobile: sourch

How to update verizon Galaxy nexus to android 4.1 jelly bean officially

Today the Verizon Galaxy Nexus Jelly Bean update started to come to customers. Many users can see this update but another are unable to get it. So with a simple trick, the owners who don’t see the update, should be available to get the Verizon Galaxy Nexus Jelly Bean update

For the moment the Verizon Galaxy Nexus Jelly Bean update is automatically available for certain people, in this moment if the Verizon Galaxy Nexus owners want to have Jelly Bean Update can use a little trick to update manually they devices and start using Android 4.1 Jelly Bean. You’ll might try several times, but this method should work.

For those with more luck by following the instructions below should be able to get Jelly Bean with all new features.

How to Get Android 4.1 Jelly Bean official for Verizon Galaxy Nexus right now

1. Go to Settings and tick Apps after press All (Settings -> Apps -> All)

2. Find Google Services Framework 

3. Tap on Force Stop

4. Select Clear Data.

5. Head back to the Verizon Galaxy Nexus’ Settings, go to about, and check for a System Update.

For many, these settings should bring a request for download and installation process for Jelly Bean should begin shortly. Usually the process may take slightly longer have to wait.
An advantage when you do your update is to be connected to a Wi-Fi network, probably the ones who will try to do updates over cellular will not succeed.

How to Root Amazon Kindle Fire HD 7 by sparkym3

Sparkym3, succeeded to develop a full automated tool, this tool is called Qemu, and is a great application which you can use if you want to root much more easily your Fire HD 7.

I will learn you how to use this tool for successfully root your Amazon Tablet.

When you have a root Fire HD 7 device you’ll can to access all system files, have possibility to use root-base apps, and if you want to change some system functions and features on your device when it is rotated.

Note: for apply this guide isn’t necessary to have installed in your computer the ADB or Android SDK, all files you will need it are listed below in the next tutorial. If you have SDK and ADB installed on your computer

Important:

Warning!

Compatibility:

• This guide is compatible only and only with the Amazon Kindle Fire HD 7?.
• Don’t apply this guide for other devices and don’t use Qemu Automated Root Tool with other Android devices.
• assure yourself you don’t have any another device beside the Kindle Fire HD 7, connected to your PC
• Make a backup for all your files that you have stored on your device.
• This guide should be used only by advanced Android users.

Note that you shouldn’t have any other Android device, besides the Kindle Fire HD 7, connected to your PC. The root will be applied with help from sparkym3?s local.prop root method.

How to Root Kindle Fire HD 7? with Qemu Automated Root Tool

1. Download the Qemu file from the source page.
2. Save it on your computer desktop.
3.  Download the ABD drivers for your tablet device – Kindle Fire HD 7 from here. Put it in the same location with Qemu zip file.
4. Extract all contents of zip files and place it in the same folder.
5. Now, you need to make enable ABD from your settings menu Kindle Fire HD 7 device. Go to open ‘Menu’, after open’more’, then open Settings and in then select ABD and make it enable.
6. Now connect your Amazon Kindle Fire HD 7 device to your windows pc using the original USB cable.
7. The next thing to do it’s to open the QemuRoot  folder and launch RootQemu.bat file.
8. The application will launch and is in order to root your Amazon Kindle Fire HD 7 tablet.
9. Press 1 and then press Enter.
10. Then, follow the onscreen instructions to root your Kindle Fire HD 7 tablet.

That’s it. Your Kindle Fire HD 7 should now be rooted. Enjoy!

For all your extra questions please use the comment section, also, let us know if this method worked without problems.

How to Root the Motorola Droid 2 Global

The Motorola Droid 2 Global is as the name would suggest, is a world phone, a great smartphone with a very good an improved physical QWERTY keyboard, it offers Quad Band GSM. Motorola Droid 2 Global has a super-fast 1.2 GHz processor and a superior security for all your business need.

But if you want more from it, you have to ROOT your Motorola Droid 2 Global, and to put the latest update ICS 4.0 OS. In this way you’ll be able to enjoy of more functionality improvements and to obtain a lot of speed.

NOTE: Use this guide at your own risk. We will not be held liable for any damage on your device as a result of using this guide.

First is very important to know is necessary to take these precautions in consideration:

• Backup your phone’s data and be sure the charge the battery to at least 80%.
• Enable USB Debugging on your smartphone. (Settings > Applications > Development) and tick the USB Debugging option.

How to Root the Motorola Droid 2 Global 2 running Android 2.2 Froyo

1. Go to Download the z4root APK application package, copy it into your smartphone’s memory and install it.
2. Once the installation is done, go to launch the z4root app on your phone.
3. Press the Permanent Root button, the application will root your phone. (BusyBox will be installed as well).
4. After that the phone will reboot afterwards. In next step go to verify if the rooting process was successfully by running the z4root app again, if you’ll see Re-root and Un-Root buttons, this means your smartphone is already rooted.

  How you Root the Motorola Droid 2 Global running on Android 2.3 Gingerbread:

1. For this procedure you need a Windows PC.
2. First must to install the Motorola USB drivers on your Windows PC . The drivers are available here: for 32-bit Windows  and for  64-bit Windows
3. Download Pete’s Motorola Root Tools and go to extract the files in your windows computer.
4. Connect the Droid 2 Global device to the PC.
5. Launch Pete’s rooting app(double-click on Pete’s Motorola Root Tools.exe located where you extracted the files)
6. Click on the Root My Phone button.
7. Now wait approximate 3 minutes, your device will restart and you’re ready to go.

Note: If you want to Unroot your phone, only go to click the Unroot My Phone button.

Download Odin 1.85

Odin is Windows-based software created especially to flash files such as ROMs on smartphones devices. Odin 1.85 does not have special requirements beyond the original USB cable of your smartphone device and can be installed on your computer Windows based.
Updating or rooting your smartphone is not easy if don’t use the special tool for make this in one easy way, this tool is Odin Software, Odin is a great tool one click rooting software, is most used and in my opinion the best software to change your smartphone ROM, or firmware.
When you have root privilege on your phone, you can make whatever you like. Odin 1.85 have a friendly graphic interface and is very easy to use, but always when you use Odin 1.85 software be very carefully when change the settings, because if you make some changes, or you put one click wrong , you can damage your smartphone device.
You must to read carefully a guide for use Odin if you don’t know to use it, and fortunately exist guides for every model of smartphone on the market.
You need Odin If you want to root your device or update it to a custom ROM, if you want to only update your smartphone with an official firmware, in this case you’ll go to use the smartphone marker’s own software because you’ll have minimum risks.
Rooting your device offers us a way to have fully control over your phone and give us a lot of advantages, but like you know no each of us needs it. You can install another new applications for make your smartphone to work much better.
When you want to update your smartphone, the updates come with series of new developments and new improvements, bug fixes and more features, therefore is really recommended to make updates , this updates can be unofficial ROM or an official, depends of you which you prefer to use them.

Download Odin 1.85

Factory Reset on Android Device

Factory reset is a very useful default feature which it’s in all Android devices, this feature can be very important in many hard situations, if you made some modifications, or you delete everything from your device, except the Android itself, if you we’ll go and you’ll make a factory reset, your device will look like new.

If you ask yourself “what does a factory reset do?” it’s good to know that, factory reset feature allows you to delete everything on your device (contacts, call logs, SMS messages, applications or data, have also an option to erase all information stored in the memory card (photos, videos, or any type of data stored in memory card).

When you want to sell your Android device Factory reset is a great tool, in this way your buyer don’t can access your private information, another situation when you can use the Factory Reset function it is also if your device begin to move slowly because you have installed many applications, when you make some wrong updates in your device and it’s hard to know what not work correctly, for example some firmware are not compatible with the others and they recommend you to make a Factory Reset.

It’s also very useful when updating to another firmware. Some types of firmware are not compatible with the others and they will require you to do a factory reset.

Be carefully because if you made a factory reset isn’t any way to recover your date after that, if you didn’t do a backup before.

Please note that there isn’t any way to recover data after a factory reset if you didn’t perform backups before.

For make an android backup you will normally need to have a root level access on your Android device and ClockworkMod installed

How factory reset on Android devices ?

It’s very easy to make a factory reset in your Android device:

Settings > Backup & reset > Factory data reset > Reset phone

Note: If you want to erase USB storage, you can check Erase USB storage for make this. 

After these operations, please check if in your device it’s on factory parameters and nothing remains on the smartphone.

I made a short video about “how factory reset on Android devices “to see how this thing is done: