Here's the solution to repair Nokia 2710ne Charging problem issues when
being damaged or occurred like, Not charging, unable to charge up the cell phone battery or it does not show the charging indication whatsoever.
This repair solution shows the location of each particular components that possibly might damaged if the said charging problem occurred.
The
charging circuit of Nokia 2710ne is originally same us other nokai
mobile phone devices. it is located at the bottom side of the PCB board isolated from other components.
Check up and repair tips:
1. check, clean or replace the charging pin connector and also see to it that the charging pin contact pads is al free from dirt and corrosion.
2. check the continuity of the fuse by using a multimeter, if found busted replacing it is highly advice.
check the diode if it is shorted, a shorted diode may cause the fuse to blown again, replace it also and don't just remove it and leave it hang in there. In this method you can save the phone in the future when an excessive charger voltage may cause the trouble again.
3. All other components needs also to check, replace as necessary if the above solution does not solve the problem. just follow the instruction on the repair guide picture above according to it marked numbers.
This repair solution shows the location of each particular components that possibly might damaged if the said charging problem occurred.
Nokia 2710 NE charging circuit components location layout
Check up and repair tips:
1. check, clean or replace the charging pin connector and also see to it that the charging pin contact pads is al free from dirt and corrosion.
2. check the continuity of the fuse by using a multimeter, if found busted replacing it is highly advice.
check the diode if it is shorted, a shorted diode may cause the fuse to blown again, replace it also and don't just remove it and leave it hang in there. In this method you can save the phone in the future when an excessive charger voltage may cause the trouble again.
3. All other components needs also to check, replace as necessary if the above solution does not solve the problem. just follow the instruction on the repair guide picture above according to it marked numbers.
No comments:
Post a Comment