5A solution for Nokia 7210s insert sim card problem. This problem causes
when the device is having a hardware damaged failure on the sim card
connection circuit.
The
solution guide above shows the connection of the Sim card pin connector
from the sim card holder socket to the internal solder ball bumps of an
IC component which is the power IC. There are 5 connections that needs
the sim card to work when inserted, these are the Vsim which the supply
voltage of the sim card, the ground connection, the data signal, clock
and reset. If one these five connections failed to connect to the sim
card module this will result on displaying insert sim card on the LCD
screen.
repair tip: ensure that the sim card connector pins are well cleaned and free from corrosion a oxidation, these oftentimes also causes the problem. check the vsim and the reset line paths continuity through to chip capacitors that where it is being connected, check also the grounding pin's continuity to ground lines of the PCB board. Those are the very basic steps to check an insert sim card problem and beyond that it needs to work on the IC component (power IC) on which the line paths where connected internally of the IC component's solder ball bumps.
Nokia 7510s Insert Sim card solution ( sim card ways)
repair tip: ensure that the sim card connector pins are well cleaned and free from corrosion a oxidation, these oftentimes also causes the problem. check the vsim and the reset line paths continuity through to chip capacitors that where it is being connected, check also the grounding pin's continuity to ground lines of the PCB board. Those are the very basic steps to check an insert sim card problem and beyond that it needs to work on the IC component (power IC) on which the line paths where connected internally of the IC component's solder ball bumps.
No comments:
Post a Comment