Nokia X6 Earpiece Speaker problem solution
If the earpiece speaker and flex cable wire is working okay, those particular components highlighted on the solution might causes the problem if the device is severely damaged by any means of liquid or water damaged. Start to check on the flex pin connector and way down toall corresponding components composed of filter coil and bypass ESD resistor,
replace at once if found open or shorted. If the filter coils were okay
you may need to rework the power and audio IC (AVILMAS) trace the line
paths first while the IC is being removed, then reball the IC, clean the
solder balls surface and inplaced it back again.
No comments:
Post a Comment