Nokia X5-01 Blank, Blue, Garbled LCD Screen Display Problem Solution

Here's a full troubleshooting guide to fix and repair Nokia x5-01 display problem issues.

This may help in troubleshooting display problems such as blank or empty screen, blue screen, white screen, garbled and saturated screen displays.

If ever encountered this kind of display problem you must first try to install a new replacement LCD module and then restore or flash the device flash firmware again.
Once the installing a new LCD screen and flashing the phones firmware but the problem still exists, you may then check the components showed on the solution below for it is where display problem occurred when these components being damaged or faulty.


Nokia X5-01 Display Filter IC solder ball bumps connection tracks
nokia X5-01 display filter IC jumper ways tracks

In Nokia X5-01, there are two ESD-EMI filter chip is being used in the display circuit, mounted or located beneath the metal shielding just besides the LCD pin connector.
You may then check this two display filter IC and or trace each line paths for possible open or cut-off lines.
Replacing a damaged Display Filter IC may only help solved and fix nokia X5-01 display problem that is not caused by the LCD module and interrupted flash firmware

No comments:

Post a Comment